Kwik-Strip paint & Varnish Remover – quart

Klean Strip- Kwik Strip Paint & Varnish Remover

-new patent pending non-methylene chloride formula
– strips 5 layers of latex paint in 15 minutes
-strip 5 layers of oil/alkyd paint in 45 minutes
-Works great on wood, metal and masonry.

Directions for use:

1. Shake well.

2. Pour into a metal container and apply a thick coat with a paint brush to a small area (up to 3 ft. x 3 ft.). Brush in one direction only. Leave the area and let the stripper do the work.

3. After 15 minutes, test scrape a small area to see if finish is ready for removal. Remove loosened finish by gently scraping in direction of wood grain with a plastic stripping tool. A toothbrush, toothpick or stripping brush will help remove old finish buried in recesses. Multiple coats or stubborn finishes may require repeat application.

4. Use a clean abrasive pad dipped in After Wash or Odorless Mineral Spirits to loosen remaining finish and remove any residue. Surface should be completely clean and dry before refinishing.